A SERVICE OF

logo

Open as PDF
next previous
Installing Your Phone
Connecting the Power
Cisco Small Business Pro IP Phone SPA50X User Guide (SPCP) 20
2
Reverse the Handset Retention Tab
If you mount the phone to a vertical surface, you must reverse the handset
retention tab on the phone body so that the handset does not fall off the phone
when it is placed on the cradle.
STEP 1 Push the latch in.
STEP 2 Slide the retention tab up until it detaches from the phone.
STEP 3 Rotate the tab 180° and re-insert into the phone base. The tab now catches the
slot in the handset when the handset is placed onto the cradle.
Connecting the Power
If you are using an external power source, insert one end of the power cord into an
outlet and insert the other end of the power cord into the power port on the phone
body.