Document #: 38-05473 Rev. *E Page 12 of 13
Document History Page
Document Title: CY7C1041DV33 4 Mbit (256K x 16) Static RAM
Document Number: 38-05473
Rev. ECN No.
Orig. of
Change
Submission
Date
Description of Change
** 201560 SWI See ECN Advance Data sheet for C9 IPP
*A 233729 RKF See ECN 1.AC, DC parameters are modified as per EROS(Spec # 01-2165)
2.Pb-free offering in the ‘Ordering information’
*B 351117 PCI See ECN Changed from Advance to Preliminary
Removed 15 and 20 ns Speed bin
Corrected DC voltage (min) value in maximum ratings section from - 0.5 to
- 0.3V
Redefined I
CC
values for Com’l and Ind’l temperature ranges
I
CC
(Com’l):
Changed from 100, 80 and 67 mA to 90, 80 and 75 mA for 8, 10
and 12ns speed bins respectively
I
CC
(Ind’l): Changed from 80 and 67 mA to 90 and 85 mA for 10 and 12ns speed
bins respectively
Added Static Discharge Voltage and latch-up current spec
Added V
IH(max
) spec in Note# 2
Changed Note# 4 on AC Test Loads
Changed reference voltage level for measurement of Hi-Z parameters from
±500 mV to ±200 mV
Added Data Retention Characteristics/Waveform and footnote # 11, 12
Added Write Cycle (WE
Controlled, OE HIGH During Write) Timing Diagram
Changed Package Diagram name from 44-Pin TSOP II Z44 to 44-Pin TSOP II
ZS44 and from 44-Pin (400-mil) Molded SOJ V34 to 44-Pin (400-mil) Molded
SOJ V44
Changed part names from Z to ZS in the Ordering Information Table
Added 8 ns Product Information
Added Pin-Free Ordering Information
Shaded Ordering Information Table
*C 446328 NXR See ECN Converted from Preliminary to Final
Removed -8 speed bin
Removed Commercial Operating Range product information
Included Automotive Operating Range product information
Updated Thermal Resistance table
Updated footnote #8 on High-Z parameter measurement
Updated the ordering information and replaced Package Name column with
Package Diagram in the Ordering Information Table
*D 480177 VKN See ECN Added -10BVI product ordering code in the Ordering Information table
*E 2541850 VKN/PYRS 07/22/08 Added -10BVJXI part
[+] Feedback [+] Feedback
