A SERVICE OF

logo

Open as PDF
next previous
Using the System Setup Program | 135
Token
Setup option
Description
485E
Reboot on WOL
(ROW)
Disables the ROW in default, Reboot on WOL(ROW) is
a feature which repurposes the traditional Wake on LAN
(WOL) signal to reboot the motherboard. During system
is in S0/S3
state, when a WOL packet is received by the NIC, the
wake
‐
up signal generated by the NIC
shall cause a hardware reboot of the motherboard.
485F
Reboot on WOL
(ROW)
Enables the ROW, Reboot on WOL(ROW) is a feature
which repurposes the traditional Wake on LAN (WOL)
signal to reboot the motherboard. During system is in
S0/S3 state, when a WOL packet is received by the NIC,
the wake
‐
up signal generated by the NIC shall cause a
hardware reboot of the motherboard.
4860
USB PORT with
BMC
This feature will allow the users to electrically disable the
internal USB port which contacts to BMC.
4861
USB PORT with
BMC
This feature will allow the users to electrically enable the
internal USB port which contacts to BMC.
4870
Force PXE Boot
only
Disables PXE to be the boot device only.
4871
Force PXE Boot
only
Enables PXE to be the boot device only. The system
retrying to boot from PXE device.
4873
Active
Processor Cores
This field controls the number of enabled 16 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
4877
PCI-E Slot1
This feature will allow the users to electrically disable
PCI-E Slot1.
4878
PCI-E Slot1
This feature will allow the users to electrically enable PCI-
E Slot1.
4879
PCI-E Slot2
This feature will allow the users to electrically disable
PCI-E PCI-E Slot2.
487A
PCI-E Slot2
This feature will allow the users to electrically enable PCI-
E Slot2.
487B
PCI-E Slot3
This feature will allow the users to electrically disable
PCI-E Slot3.
487C
PCI-E Slot3
This feature will allow the users to electrically enable PCI-
E Slot3.
487F
Mezzanine Slot
This feature will allow the users to electrically disable
Mezzanine Slot.