A SERVICE OF

logo

Open as PDF
next previous
5. Replace the six rubber bumpers to cover the screws.
6. Replace the display assembly (see Replacing the Display Assembly).
7. Replace the keyboard (see Replacing the Keyboard).
8. Replace the hinge cover (see Replacing the Hinge Cover).
Display Panel
Removing the Display Panel
1. Follow the instructions in Preparing to Work Inside the Computer.
2. Remove the hinge cover (see Removing the Hinge Cover).
3. Remove the keyboard (see Removing the Keyboard).
4. Remove display assembly (see Removing the Display Assembly).
5. Remove the display bezel (see Removing the Display Bezel).
6. Remove the six M2 x 3-mm screws (three on each side)securing the display panel to the display (top) cover.
7. Gently lift the bottom of the display panel up, then slide the display panel forward to remove it from the display cover.
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.