A SERVICE OF

logo

Back to Contents Page
Internal Card With Bluetooth®Wireless Technology
Dell™XPSM140ServiceManual
Removing the Bluetooth Module
Replacing the Bluetooth Module
Removing the Bluetooth Module
1. Follow the instructions in Preparing to Work Inside the Computer.
2. Loosen the two captive screws on the modem/Mini PCI/wireless cover, then remove the cover and set it aside.
3. Remove the M2 x 3-mm screw securing the Bluetooth module and set it aside.
NOTE: If you ordered the optional internal card with Bluetooth wireless technology at the same time that you ordered your computer, the card is already
installed.
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
1
modem/Mini PCI/wireless cover
2
captive screws (2)