140 Command Groups
Utility Commands
Auto-Install
show vrrp interface Displays all configuration information and
VRRP router statistics of a virtual router
configured on a specific interface.
UE or
PE
show vrrp interface brief Displays information about each virtual router
configured on the switch.
PE
show vrrp interface stats Displays the statistical information about each
virtual router configured on the switch.
PE
Pingable VRRP Commands
ip vrrp accept-mode Enables the VRRP Master to accept ping
packets sent to one of the virtual router’s IP
addresses.
IC
show ip vrrp interface Displays the configured value for Accept Mode. UE or
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode
a
boot auto-copy-sw Enables or disables Stack Firmware
Synchronization.
GC
boot auto-copy-sw allow-
downgrade
Enables downgrading the firmware version on
the stack member if the firmware version on the
manager is older than the firmware version on
the member.
GC
boot host autoreboot Enables rebooting the device (no administrative
intervention) when the auto-image is
successfully downloaded.
GC
boot host autosave Enables/disables automatically saving the
downloaded configuration on the switch.
GC
boot host dhcp Enables/disables Auto Config on the switch. GC
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 140 Thursday, March 10, 2011 11:18 AM
