534 LLDP Commands
The receive function accepts incoming LLDPDU frames and stores
information about the remote stations. Both local and remote data may be
displayed by the user interface and retrieved using SNMP as defined in the
LLDP MIB definitions. The component maintains one remote entry per
physical network connection.
The LLDP component manages a number of statistical parameters
representing the operation of each transmit and receive function on a per-port
basis. These statistics may be displayed by the user interface and retrieved
using SNMP as defined in the MIB definitions.
Commands in this Chapter
This chapter explains the following commands:
clear lldp remote-data
Use the clear lldp remote-data command in Privileged EXEC mode to delete
all LLDP information from the remote data table.
Syntax
clear lldp remote-data
Default Configuration
By default, data is removed only on system reset.
clear lldp remote-data lldp receive –
clear lldp statistics lldp timers –
–lldp transmit–
– lldp transmit-mgmt –
– lldp transmit-tlv show lldp remote-device
– show lldp show lldp statistics
lldp notification show lldp interface –
lldp notification-interval show lldp local-device –
2CSPC4.XModular-SWUM200.book Page 534 Thursday, March 10, 2011 11:18 AM
