Command Groups 111
802.1x
vlan Creates a VLAN. VLAN
vlan (Global Config) Configures a VLAN. GC
vlan association mac Associates a MAC address to a VLAN. VLAN
vlan association subnet Associates an IP subnet to a VLAN. VLAN
vlan database Enters the VLAN database configuration mode. GC
vlan makestatic Changes a dynamically created VLAN to a static
VLAN.
VLAN
vlan protocol group Adds protocol-based VLAN groups to the
system.
GC
vlan protocol group add
protocol
Adds a protocol to the protocol-based VLAN
identified by
groupid
.
GC
vlan protocol group name Adds a group name to the protocol-based VLAN
identified by
groupid
.
GC
vlan protocol group remove Removes the protocol-base VLAN group
identified by
groupid
.
GC
vlan routing Enable routing on a VLAN. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode
a
dot1x dynamic-vlan enable Enables the capability of creating VLANs
dynamically when a RADIUS-assigned VLAN
does not exist in the switch.
GC
dot1x initialize Begins the initialization sequence on the
specified port.
PE
dot1x mac-auth-bypass Enables MAB on an interface. IC
dot1x max-req Sets the maximum number of times the switch
sends an EAP-request frame to the client before
restarting the authentication process.
IC
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 111 Thursday, March 10, 2011 11:18 AM
