A SERVICE OF

logo

IPv6 Routing Commands 971
no ipv6 mld router
Default Configuration
MLD is disabled by default.
Command Mode
Global Configuration mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld router
ipv6 mtu
Use the ipv6 mtu command in Interface Configuration mode to set the
maximum transmission unit (MTU) size, in bytes, of IPv6 packets on an
interface. This command replaces the default MTU with a new MTU value.
Syntax
ipv6 mtu <
bytes
>
no ipv6 mtu
Parameter Description
Default Configuration
The default MTU is 1500.
Parameter Description
bytes
The maximum transmission size of an IPv6 frame. (Range:
1280-1500)
2CSPC4.XModular-SWUM200.book Page 971 Thursday, March 10, 2011 11:18 AM