138 Command Groups
Tunnel Interface
ip rip send version Configures the interface to allow RIP control
packets of the specified version to be sent.
IC
redistribute Configures OSPF protocol to allow
redistribution of routes from the specified
source protocol/routers.
PIP
router rip Enters Router RIP mode. GC
show ip rip Displays information relevant to the RIP router. PE
show ip rip interface Displays information related to a particular RIP
interface.
PE
show ip rip interface brief Displays general information for each RIP
interface.
PE
split-horizon Sets the RIP split horizon mode. RIP
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
interface tunnel Enables the interface configuration mode for a
tunnel.
GC
show interfaces tunnel Displays the parameters related to tunnel such
as tunnel mode, tunnel source address and
tunnel destination address.
PE
tunnel destination Specifies the destination transport address of
the tunnel.
IC
tunnel mode ipv6ip Specifies the mode of the tunnel. IC
tunnel source Specifies the source transport address of the
tunnel, either explicitly or by reference to an
interface.
IC
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 138 Thursday, March 10, 2011 11:18 AM
