A SERVICE OF

logo

956 IPv6 PIM Commands
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
There are no user guidelines for this command. Field descriptions are shown
in the following table.
Example
(console) # show ipv6 pim rp-hash ff1e:abcd:fed1::0
RP Address 2001:0db8:0:abcd::1
Type Static
If no RP Group mapping exist on the router, the following message is
displayed:
No RP-Group mappings exist/learnt on this router.
show ipv6 pim rp mapping
Use the show ipv6 pim rp mapping command to display the mappings for the
PIM group to the active Rendezvous Points (RPs).
Syntax
show ipv6 pim rp mapping [
rp-address
]
Field Description
RP Address Address of the RP
Type Origin from where this group mapping is learned
2CSPC4.XModular-SWUM200.book Page 956 Thursday, March 10, 2011 11:18 AM