176 Adding and Replacing Parts
Display
CAUTION: Only trained service technicians are authorized to remove or replace
the component covered by the following procedure. See your Product Information
Guide for complete information about safety precautions, working inside the
computer, and protecting against electrostatic discharge.
Removing the Display Assembly
CAUTION: Before you begin the following procedure, follow the safety
instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
1
Follow the instructions in "Before Working Inside Your Computer" on
page 156.
2
Turn the computer over and loosen the two captive screws on the mini-
card cover.
book.book Page 176 Wednesday, August 13, 2008 12:12 PM
