Press ITCM
+k
# 7 4 6
+
for base level.
I
FEATURE DESCRIPTION
>lscard Dlglts:
When the telephone
;ystem is installed behind a host system
;uch as a PBX or
CENTREX,
access
ties must be dialed before obtaining ar
outside
line dial tone. These access
:odes
should be removed before calls ar
xsted so that they are costed based on
ust the actual telephone numbers dialed
Jp to six different access codes entries
Nith
up to eight digits per entry can be
Drogrammed.
Dial Tlme Llmlt: The amount
of time tha
the
system
ignores for dialing purposes
i:
programmable. Dialing time is not
costed
when the time of a call is recorded for
costing.
Answer Tlme Llmlt: The
system can be
programmed to wait for a period of time
before beginning call cost recording. Thi!
time will allow
for a call to ring and be
answered before being costed.
ii&Y
CODE AND PROMPTING DISPLAY
1. Dial 75.
“SMDA
PROGRAMMING”
2. Dial
01
to program
costing bands.
“COSTING BANDS
”
3. Dial 4 to program
discard digits.
“DISCARD DIGITS
w
4. Dial
1
-
6 to select entry 1
-
6. “ENTRY X
”
5. Dial # for no discard digits.
-OR-
Dial up to 6 discard digits
then dial
#.
“xxxxxxxx
”
6. Dial
?#
and repeat steps 4-5 to
program next discard digit entry.
7. Dial
t
+k
for next SMDA feature.
-OR-
Dial
+
+&
+k
for configuration mode.
1. Dial 75.
“SMDA
PROGRAMMING”
2. Dial 02 to program dial time limit.
“DIAL TIME XXX
”
3. Dial time in tenths of a minute
(001
-
999.
or dial 000 to clear). “XXXX
”
4. Dial
+k
for next SMDA feature.
5. Dial
t
*
for configuration mode.
REFERENCE RECORD
5
I I II I I I I II I I
II
II
§
DEFAULT
=
NO DISCARD
DIGITS ASSIGNED
DEFAULT
=
NO DISCARD
DIGITS ASSIGNED
I
DIAI
TIME I
IMIT
DEFAULT = 0 SEC.
ANSWER TIME I IMIT
DEFAULT
=
0 SEC.
1. Dial 75.
“SMDA PROGRAMMING”
2. Dial 03 to program answer time
limit.
“ANSWER TIME XXX
”
3. Dial time in tenths of a minute (001
-
999
or dial
006
to clear).
“XXX
”
4. Dial
+k
for next SMDA feature.
5. Dial
+#
++
for configuration mode.
Press SPKR to end.
