TAB091
FEATURE BENEFIT
?rppott
for
With software release 1 la, the DigiTech digital telephone system supports the use of the
,xecuMall
voice
ExecuMail voice processing system connected to the system’s station ports through the Comdial
processing system
ATI-D analog terminal interface. The ATI-D is a muttipurpose
QB$QxB&
accessory for the digital
telephone system. It has dual circuits that allow the ExecuMail to interface to two station ports.
Refer to Comdial publication lMl89-037, lnsfallation Instructions For The Analog Terminal
interface (AT/-D) for complete details for using the ATI-D to interface between the digital
telephone system and the BxecuMail system. In addition to the required programming task of
identifying the ExecuMail station ports as voice mail ports, there are several other programming
considerations associated with the ExecuMail operation that the programmer can make whenever
their options are wanted.
VOICE MAIL PORT (Required)
The programmer must identify the station ports where the installer has connected the ExecuMail
system. Identifying them as voice mail ports enables the digital telephone system to recognize
them as such for proper call handling. Use the following programming feature to enable the
station port for ExecuMail operation.
NOTE: The digital telephone system automatically disables this feature if an
installer replaces the AT/-D with a multiline telephone at the
programmed station port.
To program this feature, press ITCM
+N
# 7 4 6
+I+
then do the following steps:
NOTE: The station that is being used for programming cannot be
programmed as a voice mail port.
1. Dial 63. “STATION FEATURES”
2. Dial 32. “VOICE MAlL PORT
*
3. Select station ports to be programmed:
-
station 1 1
-
57: Dial 11
-
67.
4. Press SPKR to end.
AUTOMATIC
AlTENDANT
(Optlon)
With the automatic attendant feature, the ExecuMail system automatically answers any line that is
ringing at a voice mail port. As a default, the system automatically enables ringing line
preference for any port the programmer identifies as voice mail ports. The programmer must
choose a ringing assignment for the lines assigned to the voice mail port before the ExecuMail
system can provide the automatic attendant feature.
To program this feature, press
ITCM
*
# 7 4 6 *then do the following steps:
Direct
Rlnglng
1. Dial 64.
“STMINE
CONFIG”
2. Dial
1.
“DIRECT RING
*
3. Select line ports for direct ringing:
-lineportl-14=DialOl
-140rpressAl
-A14,
-
line port
15,16
= Dial
1516
or press
Bl,
82,
-
line port 17
-
24 = Dial 17
-
24 ( or press HOLD then press Al
-
A8).
4. Dial # when all line ports are selected.
Continued on next page . . .
A
