26D-Link DHP-W311AV User Manual
Section 3 - Conguration
System
Save Settings To
Local Hard Drive:
Load Settings From
Local Hard Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
Clear Language
Pack:
Use this option to save the current DHP-
W310AV conguration settings to a le on
the computer you are using. Click the Save
button. You will then see a le dialog where
you can select a location and le name for
the settings.
Use this option to load previously saved DHP-
W310AV conguration settings. Click Browse
to nd a previously saved conguration le.
Then, click the Upload Settings button to
transfer those settings to the DHP-W310AV.
This option will restore all configuration
settings back to the settings that were in eect at the time the DHP-W310AV was shipped from the factory. Any settings that
have not been saved will be lost, including any rules that you have created. If you would like to save the current DHP-W310AV
conguration settings, use the Save button above.
Click to reboot the DHP-W310AV.
Clears any language pack that is currently installed. For more about language packs, refer to “Firmware” on page 27.
This page lets you both save and delete settings on your DHP-W310AV.
