A SERVICE OF

logo

39D-Link DHP-W311AV User Manual
Section 3 - Conguration
Conguring WPA/WPA2 Personal
It is recommended to enable encryption on your wireless DHP-W310AV before your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based conguration by opening a web browser
and entering the IP address of the DHP-W310AV (192.168.0.50) or
http://dlinkapWXYZ.local. (on the Wi-Fi Conguration Card) then
click on Setup and then click Wireless Settings on the left side.
2. For Security Mode, select WPA/WPA2Personal.
3. For Wi-Fi Password, enter a key. The password must be between
8-63 characters and use numbers, letters, and/or special characters.
6. Click Save Settings at the top of the window to save your
settings. If you are conguring the DHP-W310AV with a wireless
adapter, you will lose connectivity until you enable WPA on your
adapter and enter the same passphrase as you did on the DHP-
W310AV.