339
Operation
Battery isolating switch*
4
̈ Take the key out of the ignition lock
and wait for approximately
20 seconds.
̈ Move red slide 2 down in the direc-
tion of the arrow and disconnect
connector
1 from the ground pin.
̈ Clamp connector 1 under the ac-
celerator pedal so that it cannot
make contact with the ground pin.
The consumers of the vehicle battery
are cut off from the electrical circuit.
!CAUTION
Make sure that the key is in
position
0 in the ignition lock and
wait at least 20 seconds before dis-
connecting or connecting the battery
isolating switch. You could otherwise
damage electrical system compo-
nents.
Switching off the electrical system
!CAUTION
When you clamp the connector under
the accelerator pedal, make sure that
the connector does not become:
ț dirty
ț damaged
It may otherwise not be possible to
restore the electrical connection
when the parts are reassembled.
nf_BA.book Page 339 Friday, January 25, 2008 3:53 PM
