P/2 DA2 WM/EC/D/AAP Series • Appendix P/2 DA2 WM/EC/D/AAP Series • Appendix
A-3
Video output
Number/signal type
P/2 DA2 D ........................ 1 VGA–QXGA RGBHV, RGBS, RGsB,
RsGsBs, HDTV component video main
output
1 VGA–QXGA RGBHV, RGBS, RGsB,
RsGsBs, HDTV component video local
monitor output
P/2 DA2 WM F, P/2 DA2 WM F AAP
2 VGA-UXGA RGBHV, RGBS, RGsB,
RsGsBs, HDTV component video (with
adapter)
Connectors
P/2 DA2 D
Main output .............. 5 female BNC on 3" pigtails
Local monitor ........... 1 female 15-pin HD
P/2 DA2 WM F, P/2 DA2 WM F AAP
(2) 15-pin HD female (1 display, 1 local
monitor)
Nominal level ............................... 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
Minimum/maximum levels....... Analog: 0.4 V to 1.4 Vp-p (follows input)
Impedance .................................... 75 ohms
Return loss (P/2 DA2 D)............. <-38 dB @ 5 MHzP/2 DA2 WM F,
P/2 DA2 WM F AAP<-40 dB @ 5 MHz
DC offset (P/2 DA2 D)................ ±5 mV with input at 0 offset
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs, bi-level and
tri-level component video sync
Output type .................................. RGBHV, RGBS, RGsB, RsGsBs, bi-level and
tri-level component video sync
Input level ..................................... 3.0 V to 5.0 Vp-p
Output level .................................. 0.3 Vp-p for component video (bi-level
sync)
0.6 Vp-p for component video (tri-level
sync)
TTL: 5.0 Vp-p, unterminated for RGBHV,
RGBS
Input impedance .......................... 510 ohms or 10k ohm, switch selectable
A-2
Specifications, Dimensions, and Parts
Specifications
Video
Gain
P/2 DA2 D ........................ Main output: 0 dB, 0.6 dB, 1.2 dB,
selectable
Local monitor output: unity
P/2 DA2 WM F, P/2 DA2 WM F AAP
Switchable: 0 dB, +1.2 dB, +2.2 dB(0.7 V,
0.8 V, or 0.9 V when input is 0.7 V and the
gain/peaking switch is set to Unity, 50%,
or 100%, respectively)
Bandwidth
P/2 DA2 D ........................ 350 MHz (-3 dB)
P/2 DA2 WM F, P/2 DA2 WM F AAP
300 MHz (-3 dB)
N ID bits can be terminated (pins 4 and 11) via a switch setting.
Video input
Number/signal type
P/2 DA2 D ........................ 1 VGA–QXGA RGBHV, RGBS, RGsB,
RsGsBs, HDTV component video
P/2 DA2 WM F, P/2 DA2 WM F AAP
1 VGA-UXGA RGBHV, RGBS, RGsB,
RsGsBs, HDTV component video
Connectors ................................... (1) female 15-pin HD
Nominal level ............................... 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
Minimum/maximum levels....... Analog: 0.4 V to 1.4 Vp-p with no offset at
unity gain
Impedance .................................... 75 ohms
Horizontal frequency.................. 15 kHz to 135 kHz
Vertical frequency ....................... 30 Hz to 170 Hz
Return loss .................................... <-38 dB @ 5 MHz
DC offset (max. allowable)
P/2 DA2 D ........................ ±5 mV
P/2 DA2 WM F, P/2 DA2 WM F AAP
200 mV
Input coupling (P/2 DA2 D) ....... DC
