PA 300 Peaking Amplier • Specications, Parts, Accessories
Specifications, Part Numbers, and Accessories
Specifications
Video
Gain ................................................ -2.5 to +3.5 dB (x0.75 to x1.4), adjustable;
default = 0 dB
Peaking/equalization
Low frequency ............................... 0 to 4 dB at 10 MHz, adjustable
High frequency .............................. 0 to 15 dB at 120 MHz, adjustable
Bandwidth ..................................... 350 MHz (-3 dB)
Output cable driving distance ..... Up to 600' (185 m) with Extron Mini HR
cable. Up to 1000' (300 m) with Extron
RG6 or RG 59 cable (tested with a
1600x1200, 60 Hz computer video signal)
Video input
Number/signal type .................... 1 analog RGBHV, RGBS, RGsB, RsGsBs,
component video (interlaced, progressive,
HDTV), S-video, composite video
Connectors ..................................... 5 BNC female
Nominal level ................................ 1.0 Vp-p for Y of component video and
S-video and for composite video
0.7 Vp-p for RGB (excluding sync) and for
R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ Analog: 0.4 V to 2.0 Vp-p with no offset at
unity gain
Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 150 kHz
Vertical frequency .......................... 40 Hz to 140 Hz
Return loss ..................................... -30 dB @ 0 to 5 MHz
DC offset (max. allowable)........... 1 V
Video output
Number/signal type ..................... 1 analog RGBHV, RGBS, RGsB, RsGsBs,
component video (interlaced, progressive,
HDTV), S-video, composite video
Connectors ..................................... 5 BNC female
Nominal level ................................ 1.0 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB (excluding sync) and for
R-Y and B-Y of component video
0.3 Vp-p for C of S-video
[excluding sync when gain and peaking
potentiometers are set to unity gain
(follows input)]
A-2
