A SERVICE OF

logo

R
ESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
29
Loading Ribbon Into The Printer (continued)
Step Procedure
5 a. Place the supply end of the Ribbon in between the two black Ribbon Drive
Hubs located on the right-hand side of the Printer’s interior.
b. Make certain that the Ribbon is fed from underneath the Ribbon roll. Hint:
The Ribbon Drive Hub nearest you, as you are looking into the Printer
from the front, is spring loaded.
c. Use the end of the ribbon supply core to push in this Ribbon Drive Hub
when inserting the ribbon.