RESTRICTED USE ONLY FARGO Electronics, Inc.
Cleaning the Platen Rollers
Clean the Printer's Platen Roller approximately every 1,500 prints or as needed depending
on the cleanliness of the card stock and the environment in which the Printer is located.
Step Procedure
1 Clean if the Roller appears dirty or if the cards start showing speckles or debris
on the printed surface. See Steps 2 to 6 (below).
2 Leave the power ON, and open the Printer's Top Cover.
3 Remove the print ribbon.
4 Locate the Platen Roller.
5 a. Use a Cleaning Pad from the Printer Cleaning Kit to wipe the Rollers clean.
b. Press the On/Cancel button and the Pause/Resume button to move the
Rollers back and forth while cleaning.
6 After the Roller is clean and completely dry, replace the printing supplies and
close the Printer.
Persona® C25 Card Printer User Guide (Rev. 4.0)
138
