FARGO Electronics S000256 Manual

A SERVICE OF

next previous

RESTRICTED USE ONLY FARGO Electronics, Inc.

Loading Cards into the Printer

The printer will hold a maximum of 100 cards in its Card Hopper (based on a standard CR-80

card size). The Printer automatically feeds each card and adjusts to each cardís particular

size and thickness. Significantly larger or thicker cards, however, may require slight printer

adjustments for consistent printing. To load the cards into the printer, refer to the following

steps:

Step Procedure

1 Remove a stack of 100 or fewer cards from the card packaging. Do not touch the

area of the card where you intend to print. Oil or dirt from your hands can impair

print quality.

2 Open the Card Hopper Door located on the right-hand side of the printer ís exterior

by grasping the top of the door and pulling down. Allow the door to swing

completely open.

Persona® C25 Card Printer User Guide (Rev. 4.0)

144