Storage Storage
19
Base Tray
• Fit the holes on the base tray latches onto the pegs on the back
of the high chair frame.
• Fit the electronic toy to the tab on the back of the high chair,
as shown.
Peg
Hole
20
Pull Frame
Release Latch
• With the legs all the way open, lower the seat to position 7 the
lowest position).
• Pull the frame release latches forward and push the rear legs
toward the front legs.
• This prodduct may be wiped clean using a mild cleaning solu-
tion and a damp cloth. Do not immerse the base tray.
• The food trays and toys are dishwasher safe. Simply remove
the food tray from the base tray and place in your dishwasher.
To remove the pad:
• Remove the four elastic loops from the pegs on the underside
and back of the seat.
• Unfasten the pad strap from the seat back.
• Feed the shoulder portion of the waist/shoulder belts through
the slots in the seat back and the pad.
• Feed the waist portion of the waist/shoulder belts and crotch
belt down through the slots in the seat.
• Remove the waist/shoulder belts and crotch belt through the
slots in the pad.
• Unfasten the pad fasteners from the front edge of the seat
bottom.
• Remove the pad.
• To replace the pad: refer to Assembly steps 15-19.
IMPORTANT! Never use this product without the restraint system.
Replace the waist/shoulder belts and crotch belt.
Care
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.
©2005 Mattel, Inc.All Rights Reserved. PRINTED IN CHINA
® and ™ designate U.S.trademarks of Mattel, Inc. H7182pr-0726
21
Electronic Toy
Tab
