2-7
15. [DISP TIME] key
Cycles through the time display modes as follows.
16. [DISP LEVEL] key
When selecting any time display mode except "REMAIN" using the [DISP TIME] key,
this key cycles through the display mode as follows.
ABS
LTC IN
INT TC GEN
REMAIN
Time
Margin level
Track level
The track level display varies depends on the track mode when recorded.
For example, if it is recorded with the mono track mode, only the level for track 1 is
shown.
17. [SETUP] ([UTILITY]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
• Pressing this key while stopped enters the Setup mode, in which you can make
Setup menu settings.
When SHIFTed:
• Pressing this key while stopped enters the Utility mode, in which you can make
Utility menu settings.
To exit the mode, press the [EXIT/NO] key or [STOP] key.
See “Chapters 15 and 16” for details about the Setup and Utility modes.
18. [FILE SEL] ([DIRECTORY]) key
This key has primary (unSHIFTed) and secondary (SHIFTed) functions.
When unSHIFTed:
• Pressing this key while stopped enters the File select mode, in which you can select
an audio file or create a new file in the directory ("SDII" or "BWF") the current file
belongs to.
When SHIFTed:
• Pressing this key while stopped enters the Directory mode, in which you can select
an audio file from both "SDII" and "BWF" directories (Not supported!).
See "Chapter 9: Audio file management" for details.
19. [SHIFT] key
Turns the shift mode on or on. When on, the indicator is lit.
You can execute a SHIFTed (secondary) function of a key which has dual functions.
The SHIFTed functions are labeled inversely on the panel, such as (PREVIEW) and
(HOLD).
20. [VARI PITCH] key
Turns the vari speed playback mode on or off. When on, the indicator is lit.
When the vari speed playback mode is active, you can change the speed directly
using the jog dial.
DISP
TIME
LEVEL
DISP
SETUP
UTILITY
FILE SEL
DIRECTORY
SHIFT
VARI PITCH
LTC
