HandyTone -286 User Manual Grandstream Networks, Inc.
22
NTP Server:
time.nist.gov
(URI or IP address)
Send Anonymous:
No Yes (caller ID will be blocked if set to Yes)
Anonymous Method:
Use From Header Use Privacy Header
Special Feature:
Standard
Syslog Server:
Syslog Level:
NONE
Session Expiration:
180
(in seconds. default 180 seconds)
Min-SE:
90
(in seconds. default and minimum 90 seconds)
Caller Request Timer:
Yes No (Request for timer when making outbound calls)
Callee Request Timer:
Yes No (When caller supports timer but did not request one)
Force Timer:
Yes No (Use timer even when remote party does not support)
UAC Specify Refresher:
UAC UAS Omit (Recommended)
UAS Specify Refresher:
UAC UAS (When UAC did not specify refresher tag)
Force INVITE:
Yes No (Always refresh with INVITE instead of UPDATE)
Firmware Upgrade and
Provisioning:
Upgrade Via TFTP HTTP
Firmware Server Path:
fm.grandstream.com/gs
Config Server Path:
fm.grandstream.com/gs
Firmware File Prefix: Firmware File Postfix:
Config File Prefix: Config File Postfix:
Automatic Upgrade:
No Yes, check for upgrade every
1008
minutes (default 7
days)
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
Firmware Key:
(in Hexadecimal Representation)
Authenticate Conf File:
No Yes (cfg file would be authenticated before acceptance if
set to Yes)
