A SERVICE OF

logo

Hood Sensor
Description Spare part number
Hood sensor 638816-001
The hood sensor is located on the top of the rear chassis panel.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 76).
2. Remove the computer access panel (
Computer Access Panel on page 77).
3. Unplug the hood sensor cable from the connector labeled HSENSE on the system board (1).
4. Slide the hood sensor straight out of the slot in the chassis (2).
Figure 6-39 Removing the hood sensor
To reinstall the hood sensor, reverse the removal procedure.
Hood Sensor
109