The default fields do not refresh
The information in the sender information fields on the Setup tab is updated the first time that the sender
information is entered in the sender information fields in the Default Settings dialog box. If the default
sender information is changed later, the sender information fields on the Setup tab are not refreshed.
The changes are saved, but the information does not appear in the dialog box. To show the new
information, exit from the MFP Send Fax driver and then restart the driver.
Changed settings do not take effect
The MFP Send Fax driver captures MFP fax configuration information during installation. If the MFP
settings are changed after the driver is installed, complete a manual update by using the Update
Now feature to synchronize the driver with the MFP settings. Normally, closing and reopening the driver
will automatically accomplish this process.
Synchronize the driver with the MFP settings by using Update Now:
1. Click Start, click Settings, and then click Printers and Faxes.
2. Under Printer Tasks in the Printers and Faxes window, right-click the name of the MFP and then
click Properties.
3. In the HP MFP Send Fax Properties dialog box, click Device Settings.
72 Chapter 4 Solve problems ENWW
