82 HP ProLiant ML310 Generation 3 Server User Guide
– You must have the appropriate Health Drivers and Management Agents
installed on the server.
NOTE: To verify the server configuration, connect to the System
Management homepage and select Version Control Agent. The VCA
gives you a list of names and versions of all installed HP drivers,
Management Agents, and utilities, and whether they are up to date.
– HP recommends you have access to the SmartStart CD for value-added
software and drivers required during the troubleshooting process.
– HP recommends you have access to the server documentation for server-
specific information.
Symptom information
Before troubleshooting a server problem, collect the following information:
• What events preceded the failure? After which steps does the problem occur?
• What has been changed between the time the server was working and now?
• Did you recently add or remove hardware or software? If so, did you
remember to change the appropriate settings in the server setup utility, if
necessary?
• Has the server exhibited problem symptoms for a period of time?
• If the problem occurs randomly, what is the duration or frequency?
To answer these questions, the following information may be useful:
• Run HP Insight Diagnostics (on page 72
) and use the survey page to view the
current configuration or to compare it to previous configurations.
• Refer to your hardware and software records for information.
Service notifications
To find out the latest service notifications, refer to the HP website
(http://www.hp.com/products/servers/platforms
). Select the appropriate server
model, and then click the Documentation link on the product page.
