A SERVICE OF

logo

Removal and replacement procedures 30
3.
Extend the server from the rack. Reverse the server installation steps in the documentation that ships
with the rack-mounting option.
4. Press the server rail-release latches and remove the server from the rack.
5. Place the server on a sturdy, level surface.
Front bezel
Tower servers have a removable front bezel that must be unlocked and opened before accessing the hard
drive cage, and before removing the access panel.
To remove the component:
1. Open the front bezel (tower servers only).
IMPORTANT: You must unlock the front bezel before removing the access panel.
2. Lift up the front bezel and remove it from the chassis.
To replace the component, reverse the removal procedure.