A SERVICE OF

logo

22 Installing the Autoloader Chapter 1
Verify the connection between the autoloader and host by:
Installing the HP Library & Tape Tools diagnostic/installation check
utility available at http://www.hp.com/support/TapeTools. Install this
utility onto the host server. This utility verifies that the autoloader is
connected and communicating with the host server. It also verifies that
the autoloader is functioning and provides diagnostic information.
Making sure that the host server’s operating system recognizes the
autoloader by going to Settings -> Control Panel -> SCSI Adapter in
Windows NT or Settings -> Control Panel -> System -> Hardware ->
Device Manager -> Tape Drive and/or Media Changer in Windows
2000. For more information on verifying the connection of SCSI
devices, consult the operating system documentation.