6
Installation
NOTE • Set the tilt angle of Set
A
within 9 degrees of the level line.
(continued on next page)
Deciding the installation position
Decide the position of Set A and its projection angle. (User’s Manual (concise)
→ Arrangement and Adjusting the projector’s elevator)
2.2 Installing the rst projector (Set A)
Setting up Set A
2. Adjust the INSTALLATION settings rst because it may change the
image position. (Operating Guide → SETUP menu )
3. Adjust the image of Set A to t the screen with the ZOOM, FOCUS and LENS
SHIFT features. (Operating Guide → Adjusting the lens)
Adjust the image position using KEYSTONE and PERFECT FIT as needed.
(Operating Guide → EASY MENU or SETUP menu)
NOTE • KEYSTONE cannot be selected when PERFECT FIT is in use.
To adjust the image using both KEYSTONE and PERFECT FIT, adjust
KEYSTONE rst.
• If you are using Simple Stack, go to
2.3 Installation of the second projector
(Set B)
.
(
8
)
1. Turn on Set A.
WARNING
►
For IN5142, IN5144, IN5144a and IN5145 only: You can install
the projector in any direction with specied mounting accessories. Consult with
your dealer for that type of installation.
