28
initio
®
COMPUTER from the desktop. Then select CONTROL PANEL:
Select SYSTEM from within the CONTROL PANEL group,
Select DEVICE MANAGER from within the SYSTEM group,
Select SCSI CONTROLLER from within the DEVICE MANAGER listing, and
Select the Initio INI-9XXXU/UW PCI SCSI Host Adapter from within the SCSI
CONTROLLER listing. If This device is working properly is displayed on your
screen, the driver has been correctly installed.
This completes loading the Host Adapter Driver, follow the on-screen directions to com-
plete the Windows 95 installation. Exit and reboot the system to activate the device
driver.
Adding the Initio Driver to an Existing Windows 95B (OSR2)
System
These instructions will guide you through the installation of the Initio host adapter to
an existing Windows 95 system. Windows 95 will automatically detect the presence of
new hardware in Plug and Play compliant systems. It is important that the Initio INI-
9XXX hardware has been properly installed before proceeding further.
1 Microsoft Windows 95 will detect the presence of new hardware upon boot-up and
will display a dialog window titled update Device driver wizard
2 Insert the INI-9XXXU/9XXXUW DRIVER DISK 1 into floppy drive,:
Select NEXT
Select the OTHER LOCATION
Type A:\Win95, then select OK
Select FINISH
At window Insert Disk labled INI-9XXXU/9XXXUW driver, select OK
At window titled Copying file, replace the highlighted directory path with
A:\Win95, then select OK this will complete loading the INI910U.MPD driver
onto your hard disk drive. Restart your computer.
3 It is highly recommended that you verify Initios Windows 95 device driver by selecting
MY COMPUTER from the desktop. Then select CONTROL PANEL:
Select SYSTEM from within the CONTROL PANEL group,
Select DEVICE MANAGER from within the SYSTEM group,
Select SCSI CONTROLLER from within the DEVICE MANAGER listing, and
Select the Initio INI-9XXXU/UW PCI SCSI Host Adapter entries from within
the SCSI CONTROLLER listing. If This device is working properly is displayed
on your screen, the driver has been correctly installed.
Microsoft Windows 95/95b (OSR2) Driver Installation
