A SERVICE OF

logo

CRANKSHAFT/TRANSMISSION 10-23
Transmission
Install:
Idle Shaft [A] with Gear Assembly [B]
Spacer [C]
Spacer [D] (P/No. 92026-1599, 48.2 × 54.3 × 1.0)
Apply engine oil to the inner surface of the spacer [E].
Install the spacer [E] so that the stepped side [F] f aces
outward.
Install:
Spacer
Toothed Washer [A]
Circlip
Special Tool - Outside Circlip Pliers: 57001-144
Apply engine oil:
Shift Rod [A] and Shift Fork Ear [B]
Needle Bearing [C]
Install:
Shift Rod with Shifter
Spacer [D]
Needle Bearing
Install:
Reverse Drive G ear [A]
Spacer [B]
Install:
Reverse Idle Shaft [A]