A SERVICE OF

logo

FINAL DRIVE 12-29
Front Axle
Left Front Axle: 178.6 mm (7.03 in.) [A]
Open the edge [A] of the boot in order to equalize the air
pressures.
Tighten the large band [A] and bend the tangs securely to
hold down the end of the band.
Maximum Outside Diameter of Band: 80.2 mm (3.16 in.)
(After tightening the outside diameter)
Inboard Joint Boot Removal
Remove:
Front Axle (see Front Axle Removal)
Boot Bands [A]
Scrap the removed boot bands.
Slide the joint boot toward the outboard joint [B].
Remove the retaining ring [A].
Separate to the axle shaft.