FINAL DRIVE 12-73
Bearing and Oil Seal
Ball or Needle Bearing Inspection
Since the bearings are made to extremely close toler-
ances, the clearance cannot normally be measured.
CAUTION
Do not remove any bearings for inspection except
the right rear axle bearing.
•
Turn each bearing in the case or hub back and forth [A]
while checking for plays, roughness, or binding.
If bearing play, roughness, or binding is found, replace
the bearing.
•
Check the needle bearings [A].
○
The rollers in the needle bearing normally wear very little,
and wear is difficult to measure. Instead of measuring,
inspect the bearing for abrasion, color change, or other
damage.
If the bearing is damaged, replace the bearing.
