Beskrivelse • TilkoBling • linjevelgeren
ConneCTing and insTalling The uniT
Connect to an analogue line, wireless DECT telephone/mobile phone or PC as illustrated.
An optional phone cable is required for connection to DECT/mobile phones.
Plug the Konftel 300 into the mains using the power adapter as illustrated.
The rst time the Konftel 300 is started, you will be required to select the region in which
you are located. This congures the phone to the telecom network for that region.
Select the region in which you are located. Click OK to conrm your selection.
Select the language you want. Click OK to conrm your selection.
Select MENU > seTTings if you want to set the date and time or make other adjustments.
Place the conference phone in the middle of the table.
LINE MODE – SWITCH AND COMBINE
An analogue phone line is the pre-programmed option, but it is possible to switch between and
combine two connectivity options.
Press the LINE MODE key.
Select a connection option and press OK to conrm.
You can add another line, disconnect or switch between connected lines during a call.
ConneCTion • line mode
Connection to a PC
The Konftel 300 acts as
a loudspeaker and micro-
phone for your PC and in
stand-by mode (not call
mode) can be used to play
audio and music.
Used with a conference
software (e.g. Skype
®
) the
Konftel 300 becomes the
ultimate conference system
enabling you to hold group
calls with other Skype users
across the Internet, a large
number of local participants
round the conference phone,
and participants called
via normal phone lines or
mobile phones connected to
the Konftel 300.
For calls via Skype, the
Konftel 300 is put in call
mode and the call is
then connected over the
Skype network in the usual
way.
