A SERVICE OF

logo

Open as PDF
next previous
Repair Information 4-5
4085-001
Operator Panel Cover/Operator Panel Removal
1. Remove the rear cover.
2. Remove the screw {A}.
3. Lift the cover and unplug the operator panel from the engine
board.
4. Remove the four screws located on the rear operator panel
housing.
5. Remove the operator panel.
Exit Tray Removal
1. Remove the paper tray.
2. Depress the latch on the bottom of the tray.
3. Lift the front of the exit tray and pull forward to remove.
Note: Use care not to damage the bat wings.