Setup
2-2 PagePrinter Network Adapter: Utilities & Environments
For more information
This utility guide uses standard TCP/IP protocols. Information about these
standard protocols is available in RFCs (Request For Comments). These RFCs
contain TCP/IP information that is not unique to the Network Adapter.
To obtain an RFC, use FTP services on the Internet as an anonymous user to:
nic.ddn.mil
Look for the RFC in the /rfc directory.
For more information about TCP/IP, we recommend a book by Douglas Comer
entitled Internetworking with TCP/IP, Volume I: Principles, Protocols, and
Architecture.
Setup Before you can use the adapter, you need to set it up. Setup involves a few
simple steps:
1 Checking the physical connections.
2 Printing a setup page to use while you set up the adapter.
3 Setting the adapter’s IP address, netmask, and gateway.
4 Verifying the setup.
5 Setting a community name.
The rest of this Setup section tells you how to do these steps.
