Introduction 1
E-EQ-MX2DKOG-B MX2 Docking Station User’s Guide
Introduction
LXE offers one docking station for the MX2 – a stationary single dock that holds one MX2. The
stationary single dock powered docking station has two primary uses:
• Recharge the MX2 NiMH battery pack and lithium backup batteries.
• Provide a connection for serial communications between the MX2 and the host computer or
another serial device, such as a printer or modem.
The powered docking station requires an AC/DC power source.
Note: Do not use the MX2 docking station with any other unit.
Note: The MX2 is not designed to use alkaline batteries.
The “MX2 Reference Guide” contains MX2 technical information and advanced functions.
Please refer to this manual when preparing to dock the MX2 or communicate with the host.
Please refer to the “MX2 Installation and Operator’s Guide” when using the MX2 with a
Docking Station.
Features
The LXE stationary powered dock features:
• Recharge the NiMH battery pack and backup battery.
• Provide a connection for serial communications between the MX2 and the host computer or
another serial device, such as a printer or modem.
• Power supplies are available that meet either 110V - 120V or 200V - 240V.
Document Conventions
This reference guide uses the following document conventions:
Convention Meaning
"Quotes" Indicates the title of a book, chapter or a section within a chapter (for
example, "Document Conventions").
< > Indicates a key on the keypad (for example, <CTRL> ).
Indicates a reference to other documentation.
Note: Keyword that indicates immediately relevant information.
CAUTION
Keyword that indicates a cautionary warning to follow.
ATTENTION
Keyword that indicates vital or pivotal information to follow.
