Table of Contents
Introduction 1
Quick Start 1
Cautions and Warnings 2
Components 3
MX7 Battery Multi-charger Components 3
Installation 4
Assemble the Power Supply 4
Setup 4
Charging Batteries 5
Inserting aBattery into the Charging Pocket 6
Remove the Battery from the Charging Pocket 6
Interpreting the ChargingPocket LEDs 7
RED Continuous -on any charge pocket 7
RED FLASHING - onany charge pocket 7
RED FLASHING - onall charge pockets 7
GREEN - on any charge pocket 7
YELLOW -on any charge pocket 7
NO LIGHT - onany charge pocket 7
NO LIGHT - onall charge pockets 7
Charge Timer 7
Multi-charger 7
Interpreting the LCD Screen 8
Charge Only 8
Ready 9
Analyze 9
Initial Charge 9
Discharge 9
Final Charge 10
Ready 10
Battery Fault 10
Troubleshooting 11
Charger Cleaning, Storage andService 13
Cleaning 13
Storage 13
Service 13
Set up a Battery Maintenance Routine 14
Introduction 14
E-EQ-MX7CHGROG-E-ARC [ i ] MX7 Battery Multi-Charger/AnalyzerUser Guide
