8 Placing the Battery Pack into the Charger
MX3 Multi-Charger User’s Guide E-EQ-MX3CHGROG-F-ARC
Interpreting the LEDs
The status of the charge operation is communicated by the LED located at the base of each
charging pocket.
RED - on any charge pocket
Continuous Battery pack - charging.
Flashing Battery pack fault or failure.
Battery charger timeout period expiration.
RED FLASHING - on all charge pockets
Battery charger fault or failure.
GREEN - on any charge pocket
Continuous Battery pack charge complete - Ready.
YELLOW - on any charge pocket
Continuous Battery pack temperature is out of range - Standby.
NO LIGHT - on a charge pocket
No battery pack installed.
Defective or damaged battery pack or charger. Refer to Troubleshooting Guide.
NO LIGHT - on all charge pockets
No battery packs installed.
No power applied to the Multi-Charger.
