268 Word length selection must be 0 (7 bits), or 1 (8 bits).
Resend the communication settings packet or check the
DIP switch settings.
269 Stop bits selection must be 0 (1 bit), or 1 (2 bits).
Resend the communication settings packet or check the
DIP switch settings.
270 Parity selection must be 0 (none), 1 (odd), or 2 (even).
Resend the communication settings packet or check the
DIP switch settings.
271 Flow control selection must be 0 (none), 1 (DTR), 2
(CTS/RTS), or 3 (XON/XOFF). Resend the
communication settings packet or check the DIP switch
settings.
272 Internal code page selection must be 0 (Internal), 1
(ANSI), 2 (DOS 437), 3 (DOS 850), 4 (1250- Latin 2), 5
(1251- Cyrillic), 6 (1252- Latin 1), 7 (1253- Greek), 8
(1254- Turkish), 9 (1255- Hebrew), 10 (1256- Arabic), 11
(1257- Baltic), 12 (1258- Vietnamese), 13 (852- Latin 2),
14 (855- Russian), 15 (857- IBM Turkish), 16 (860- DOS
Portuguese), 17 (Wingdings), 18 (Macintosh), 19
(UNICODE), 20 (BIG5), 21 (GB), 22 (SJIS to SJIS), 23
(GB to GB), 24 (BIG5 to BIG5), or 25 (KSC to KSC).
273 Cut adjustment must be -300 to 300 dots.
282 RS232 Trailer string is too long. Use a maximum of 3
characters.
283 ENQ Trailer string is too long. Use a maximum of 3
characters.
284 The buffer type must be T (Transmit), R (Receive), I
(Image), F (Format), or D (Downloadable Fonts).
285 The storage device type in the memory configuration
packet must be N (non-volatile RAM) or R (volatile
RAM).
Diagnostics and Errors
8-13
