Format 1 was added to flash memory and uses English units. The
supply length was two inches and the supply width was two
inches. The format name was "FMT1." Format 5 was added to
flash memory and uses English units. The supply length was four
inches and the supply width was two inches. The format name
was "FMT5."
Example
{G,0,H
p
}
Selects all the graphics in flash memory and uploads the
information.
The printer returns the following to the host:
{10,A,F,G,812,406,"Wire"
p
99,A,F,G,350,406,"Logo"
p
}
Graphic 10 was added to flash memory and uses Graphic units.
The supply length was 812 dots and the supply width was 406
dots. The format name was "Wire." Graphic 99 was added to
flash memory and uses Graphic units. The supply length was 350
dots and the supply width was 406 dots. The format name was
"Logo."
If no packets are stored in flash memory, empty brackets {} are
returned to the host.
Flash Considerations
Note the following items when storing formats, graphics, or check
digits in flash:
◆
Packets with the same number should not be added to flash
memory. If two packets with the same number are stored in
flash, only the last packet sent can be used. For example, if
you send the following packets to flash memory, only the
"Textiles" format can be used.
{F,10,A,F,E,300,200,"UPC"
p
p
}
{F,10,A,F,E,300,200,"Textiles"
p
p
}
Flash
Selector
2-36
Configuring the Printer
