133
• Record List/Thumbnail Display
You can operate the Record List or Thumbnail Display by
referring to the recorder’s operating instructions. In addi-
tion, the following operations from the system controllers
are also available.
Joystick to UP (D): Moves the cursor up.
Joystick to DOWN (C): Moves the cursor down.
Joystick to L (A): Moves the cursor to the left.
Joystick to R (B): Moves the cursor to the right.
CAM(SET) button: Displays the search editing area./Starts
the search after you enter the search condition.
MON(ESC)button: Cancels the search editing area and
returns to the Record List or Thumbnail Display.
NEXT button: Increments a parameter.
PREV button: Decrements a parameter.
PLAY button: Starts the playback of a record pointed by
the cursor.
Note: The PLAY button is deactivated in the search editing
area.
● Electronic Zooming (EL-ZOOM)
Playback images can be electrically zoomed besides a
camera's optical zooming.
1. Enter the recorder mode (Refer to p. 131 Recorder
Mode.)
2. Press the PLAY button.
3. Press the numeric button corresponding on the desired
camera number to display the spot picture.
4. Press the CAM (SET) button.
The selected camera’s picture is displayed in the spot
mode.
5. Each time the button 4 and the SHIFT button are
pressed, the zooming range are changeable as follows:
2x → 4x → 8x → 1x → 2x
6. To return the zooming range to x 1, press the button 4
while holding down the SHIFT button again.
7. To return to the multiscreen display, press the button 0
while holding down the SHIFT button.
Note: You can move the zoomed area on the monitor
with the joystick after Step 5.