2001 Pontiac Aztek 1-43
Panel Replacement
– Rear End
Installation Procedure
IMPORTANT: In any area damaged
beyond recognition, space plug weld
holes every 40 mm (1-1/2 in.) apart.
1. Drill 8 mm (5/16 in.) plug weld
holes in the service part as
necessary in locations noted from
the original panel.
2. Prepare all attachment surfaces as
necessary.
3. Apply weld-thru primer to all bare-
metal surfaces.
4. Position the Rear End Panel.
5. Plug weld accordingly.
IMPORTANT: Prior to refinishing,
refer to publication GM4901M-D-01
GM Approved Refinish Materials for
recommended products. Do not
combine paint systems. Refer to
paint manufacturer’s
recommendations.
6. Clean and prepare all welded
surfaces.
7. Apply the following as necessary:
• Anti-corrosion materials
• Sound deadeners
• Sealers
8. Refinish as necessary.
9. Install all related panels and
components.
