ZPL-II Emulation
ZPL-II Emulation supports a subset of the Zebra ZPL-II command set and allows the Printek MtP Series
printers to respond to commands designed to control a ZPL-II compatible printer. The commands that are
supported are listed below.
Select Font For Current Field ^A n1,n2,n3,n4
Interleaved 2 of 5 Bar Code ^B2 n1,n2,n3,n4,n5
Code 39 Bar Code ^B3 n1,n2,n3,n4,n5
PDF417 Bar Code ^B7 n1,n2,n3,n4,n5,n6
EAN-8 Bar Code ^B8 n1,n2,n3,n4
UPC-E Bar Code ^B9 n1,n2,n3,n4,n5
Code 128 (A, B, C) Bar Code ^BC n1,n2,n3,n4,n5,n6
EAN-13 Bar Code ^BE n1,n2,n3,n4
ANSI Codabar Bar Code ^BK n1,n2,n3,n4,n5,n6,n7
UPC-A Bar Code ^BU n1,n2,n3,n4,n5
Bar Code Field Default ^BY n1,n2,n3
Download Format ^DF n1:n2.n3
Field Data ^FD n
Field Number ^FN n
Field Origin ^FO n1,n2
Field Separator ^FS or SI
Graphic Box ^GB n1,n2,n3,n4,n5
Change Backfeed Sequence to Normal ~JSN
Set 230 Dots Per Inch ^JMA
Reprint After Error = Yes ^JZY
Label Home ^LH n1,n2
Label Reverse Print = No ^LRN
Label Top ^LT n
Map Clear = Yes ^MCY
Print Mirror Image = No ^PMN
Print Quality ^PQ n1,n2,n3,n4
Print Rate = Maximum ^PR4,4
Select ZPL-II ^SZ2
Media Feed ^MF n1,n2
Start Format ^XA or STX
Recall Format ^XF n1,n2,n3
End Format ^XZ or ETX
Additional Printer Control
Select Emulation ESC ESC n
37
