Installation and Initialization AP-700 User Guide
Product Package
19
Product Package
Each AP-700 comes with the following:
• AP-700 unit (with integrated 802.11a/b/g radio and Active Ethernet)
• Power adapter
• One ceiling or wall mounting plate
• Security cover
• One Installation CD-ROM that contains the following:
– Software Installation Wizard
– ScanTool
–MIBs
– User’s Guide in PDF format
– Xtras folder containing the following
• SolarWinds® TFTP software
• Ekahau™ Site Survey software
• Acrobat® Reader software
•One Quick Start Flyer
If any of these items are missing or damaged, please contact your reseller or Technical Support (see Technical Support
for contact information).
System Requirements
To begin using an AP, you must have the following minimum requirements:
• A 10Base-T Ethernet or 100Base-TX Fast Ethernet switch or hub or cross-over Ethernet cable
• At least one of the following IEEE 802.11-compliant devices:
– An 802.11a, 802.11b, or 802.11b/g client device
• A computer that is connected to the same IP network as the AP and has one of the following Web browsers installed:
– Microsoft® Internet Explorer 6 with Service Pack 1 or later and patch Q323308
– Netscape® 7.1 or later
(The computer is required to configure the AP using the HTTP interface.)
