CHAPTER 3: PREPARE RARITAN DEVICES 17
3. Press CTRL+S to save the settings. The Main Menu appears.
4. Press R to restart.
5. Press ENTER.
6. Press R again to reboot the Dominion KSX.
Connect to Network and Attach Serial Devices
1. [Optional] Disconnect the PS/2 keyboard and multi-sync monitor from the Admin Console
ports. Or leave them attached for future monitoring or configuration.
2. Connect a standard Ethernet cable (included) from the network port labeled LAN1 to an
Ethernet switch, hub, or router.
3. To attach a device with a standard DB9 or DB25 serial console port to Dominion KSX,
connect one end of a standard Cat5 Ethernet cable to a serial console port on the Dominion
SX.
4. Connect the other end of the Cat5 Ethernet cable to a Raritan Nulling Serial Adapter (p/n
ASCSDB9F, ASCSDB9M, ASCSDB25F, ASCSDB25M) as appropriate.
