18 RARITAN DIGITAL SOLUTION DEPLOYMENT GUIDE
Preparing IP-Reach Devices for CC-SG Management
The following section provides you with the necessary background information and steps to
install and configure Raritan IP-Reach units to conform to CC-SG’s requirements.
Note: Be sure to document the device name, IP address, administrative username and password,
and attached systems (port number, type, system name) in Appendix A: Installation Template.
Please refer to Raritan’s IP-Reach Quick Setup Guide for additional information.
IP Reach TR or M Series
Attach Power Cord and Local Console
1. Connect the included AC power cord to the IP-Reach unit.
2. Attach a PS/2 keyboard and multi-sync monitor to the corresponding ports in the back of the
IP-Reach marked Admin Console.
3. Power ON the IP-Reach.
Figure 7 IP-Reach TR Series
Figure 8 IP-Reach M Series
