Chapter 2 9
Graphics contained within this publication are for representation only.
Chapter 2: Using the Remote Control
Button Descriptions
Arrows Used to highlight different items in the TV menu and to adjust the menu
controls.
Indicator Indicates the programming mode when programming the remote to
control components. Lights when you press a valid button on the remote. Flickers
when a button is pressed and the batteries are low.
(0-9) Number Buttons Enter channel numbers and time settings directly
through the remote control.
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press
the two digits and expect a few seconds delay. This is if you want to enter a third
digit.
AGAIN In DVD mode, goes back approximately 10 seconds to see and hear missed
content.
CC In TV mode, toggles closed captioning on and off. In DVD mode, displays the
Info Display with the Subtitle icon highlighted.
ANTENNA In VCR mode, functions as a TV/VCR button.
CH + or CH - In TV mode, scans up or down through the current channel list.
Press once to change the channel up or down; press and hold to continue
changing channels. In DVD mode, highlights the Chapter Info Display icon.
CLEAR Removes any menu or display from the screen and returns you to normal
viewing.
DISC MENU In DVD mode, press while playing a DVD or Video disc and the disc’s
menu system will appear.
DVD Puts the remote in DVD mode.
FORWARD In DVD mode, advances the disc forward.
GO BACK In TV mode, returns you to the previous channel. In DVD mode, returns
you to previous screen.
GUIDE If you’re operating another component that has a guide, this button
accesses the on-screen Guide.
INFO In TV mode, brings up the channel banner. In DVD mode, displays the Info
Display.
INPUT Toggles through the available input sources (VID1/SVID1, VID2, FRNT, and
current channel).
MENU Brings up the TV’s Main menu.
MUTE Reduces the TV’s volume to its minimum level. Press again to restore the
volume.
OK When in the menu system, selects highlighted items.
ON•OFF When in TV mode, turns the TV/DVD on and off. If in another mode
(VCR) and programmed, will turn the component on and off.
OPEN•CLOSE Opens the disc tray if it is closed; closes the disc tray if it is open.
PAUSE In DVD mode, press PAUSE when the disc is playing to pause playback.
PLAY In DVD mode, plays the disc.
DVD
ON OFF
VCR TV
VOL
MUTE GO BACK
CH
CLEAR
MENU
PRESETS
CC
GUIDE
INFO
SKIP
123
4
56
7
89
0
INPUT
ANTENNA
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUSE
AGAIN
ZOOM
OPEN CLOSE
SPEED
SEARCH
OKOK
DISC MENU
Indicator
